Dodge 2006 LX Charger Installationsanleitung Seite 4

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 53
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 3
ii
Dodge Charger 2006-2008 System Installation Guide
Introduction
Thank you and congratulations on the purchase of your ProCharger centrifugal supercharger system, and
welcome to the world of intercooled supercharging. You are now the owner of the most powerful, reliable,
and technologically advanced supercharger system available! With your new intercooled supercharger
system installed, you will experience horsepower gains in excess of 50% over stock!
If you are performing the installation of this system and this is your first supercharger installation, you
will likely benefit from reading the entire installation instructions prior to proceeding, and then reviewing
each section as you go. If you are familiar with supercharging, remember that intercooled supercharging is
different from non-intercooled supercharging, and the same rules do not necessarily apply. This is primarily
due to the unparalleled airflow and boost generated by the ProCharger, and the substantially cooler intake
temperatures that result from intercooling this boost.
Once your system is installed and dialed in, you will experience a performance gain that is much greater
than that delivered by non-intercooled supercharger systems. The utilization of intercooling technology
allows power gains for multiple reasons, primarily the following three:
1) Increased charge air density (lb/cubic ft) over non-intercooled applications. Cooler air is more dense, and
as such may be more easily delivered to the cylinders.
2) Decreased charge air temperature allows total spark advance closer to that which is ideal for peak power
production when compared to non-intercooled installations at similar boost levels.
3) The use of an intercooler allows higher peak boost levels for a given fuel (e.g.: pump gas). This means
charge air densities double that of atmospheric may be utilized on some pump gas applications,
resulting in power output nearly double that obtained when operating naturally aspirated.
Seitenansicht 3
1 2 3 4 5 6 7 8 9 ... 52 53

Kommentare zu diesen Handbüchern

Keine Kommentare