32
Dodge Charger 2006-2008 System Installation Guide
Fuel System
Fuel Pump Booster
(Booster is only included and
required for 6.1L SRT8 Models
Only)
1
Make sure the ignition is off and the key is
removed from the ignition.
2
Connect the manifold pressure trigger
wiring to the boost switch and insulate the
terminals using the supplied shrink tubing
(Figure 1).
3
Connect the boost switch to the vacuum
manifold if not already done (Figure 2).
4
Route the trigger wiring to the power
distribution center located in the trunk
(Figure 3-8).
Boost Switch (Figure 1)
Vacuum Manifold (Figure 2)
Kommentare zu diesen Handbüchern