Dodge Charger 2006-2008 System Installation Guide
23
ProCharger Cog Belt
1
Position the lower cog pulley in the loose
position by rotating the drive transfer
housing counter-clockwise.
2
Remove the outer fl ange from the
ProCharger cog pulley.
3
Feed the cog belt onto the lower cog
pulley.
4
Roll the cog belt onto the upper cog
pulley.
5
Reinstall the fl ange to the upper cog
pulley using Loctite on each of the screws.
6
To tighten the cog belt, rotate the drive
transfer housing clockwise and align the
fi rst marks on housing and bracket. After
approximately 1,000 miles, re-tension the
cog belt by rotating the drive transfer
housing to second mark.
7
Tighten the three
1
⁄4-20 x
5
⁄8” bolts located
on the back bracket to lock in the drive
transfer housing with a
7
⁄16 wrench.
8
Install the cog guard.
PROCHARGER COG BELT
Cog Pulley Outer Flange
Cog Pulley Guard
Kommentare zu diesen Handbüchern