Dodge RAM 1500 2010 Bedienungshandbuch PDF herunterladen (Seite 8)

8 ‘09-’10 1500 Front Leveling - Kit DL229

much greater now that the kit coil spacer is in

place.)

3. Install ABS lines back into there clips.

4. install two lower nuts into both rear sway bar end

links.

5. Install rear wheels onto vehicle with lug nuts. Snug,

but DO NOT TIGHTEN.

6. Using hydraulic floor jack, raise rear of vehicle and

remove jack stands. Slowly lower vehicle onto

ground.

7. TORQUE rear lug nuts to specification.

Rear Shock

Install Rear

Shock Bolt

Brake line

Install ABS

Line

After Completing Installation

Engine Compartment

1. Connect both battery cables. Connect positive cable

first, then negative cable.

Miscellaneous

1. Apply kit label (warning) onto dashboard in plain

sight of all vehicle occupants.

2. Adjust headlights.

3. Check all fasteners to ensure they are tight.

4. Ensure all wires, hoses, cables, etc. are properly

connected and there is ample slack.

5. Align vehicle to OE specifications. Retain alignment

results.

Dynamic Vehicle Check

1. Check steering and suspension in all positions to

ensure that there is no bind and adequate clearance

between all moving, fixed, and heated members.

Check operation of clutch, brake system, and park-

ing brake. Check operation of transmission and

transfer case. Ensure there is full engagement in all

gears and 4WD ranges. Check battery connections

and electrical component operations. Test-drive

vehicle.

WARNING

Retorque all fasteners after 500 miles and after off road

use. All suspension lift components should be visually

inspected and fasteners retorqued during routine vehi-

cle servicing.

Positive

Cable

Battery

Negative

Cable

Performance Automotive Group

www.p-a-g.net

1 2 3 4 5 6 7 8 9

Kommentare zu diesen Handbüchern

Keine Kommentare

Dodge RAM 1500 2010 Bedienungshandbuch Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Dodge RAM 1500 2010