Dodge 2013 Durango Bedienungsanleitung PDF herunterladen (Seite 108)

100

101

Any seat belt system will loosen with time, so check the

belt occasionally, and pull it tight if necessary.

If the buckle or the cinching latch plate is too close to the

belt path opening of the child restraint, you may have

trouble tightening the seat belt. If this happens, discon-

nect the latch plate from the buckle and twist the short

buckle-end belt up to three full turns to shorten it. Insert

the latch plate into the buckle with the release button

facing out, away from the child restraint. Repeat steps 4

to 6, above, to complete the installation of the child

restraint.

If the belt still cannot be tightened after you shorten the

buckle, disconnect the latch plate from the buckle, turn

the buckle around one half turn, and insert the latch plate

into the buckle again. If you still cannot make the child

restraint installation tight, try a different seating position.

Installing Child Restraints Using The Top Tether

Anchorage

1. Look behind the seating position where you

plan to install the child restraint to find the

tether anchorage. You may need to move the

seat forward to provide better access to the

tether anchorage. If there is no top tether anchorage for

that seating position (see the charts above), move the

child restraint to another position in the vehicle if one is

available.

2. To access the top tether strap anchorages behind the

rear seat, pull the carpeted floor panel away from the

seat back, this will expose the top tether strap anchor-

ages.

106 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 696 697

Kommentare zu diesen Handbüchern

Keine Kommentare

Dodge 2013 Durango Bedienungsanleitung Seite 108

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Dodge 2013 Durango