Dodge 2013 Durango Bedienungsanleitung PDF herunterladen (Seite 206)

100

101

To Activate

1. Enable the Automatic High Beams. Refer to “Elec-

tronic Vehicle Information Center (EVIC)/Customer-

Programmable Features” in “Understanding Your In-

strument Panel” for further information.

Turn the headlight switch to the AUTO headlight posi-

tion.

3. Push the multifunction lever away from you (toward

front of vehicle) to engage the high beam mode.

NOTE: This system will not activate until the vehicle is

at or above 20 mph (32 km/h).

To Deactivate

Pull the multifunction lever toward you (or rearward in

car) to manually deactivate the system (normal operation

of low beams).

2. Push back on the multifunction lever once again to

reactivate the system.

Daytime Running Lights — If Equipped

The Daytime Running Lights (low intensity) come on

whenever the engine is running, and the transmission is

not in the PARK position. The lights will remain on until

the ignition is switched to the OFF or ACC position or the

parking brake is engaged. The headlight switch must be

used for normal nighttime driving.

Headlight Delay

To aid in your exit, your vehicle is equipped with a

headlight delay that will leave the headlights on for

approximately 90 seconds. This delay is initiated when

the ignition is turned OFF while the headlight switch is

on, and then the headlight switch is cycled off. Headlight

delay can be cancelled by either turning the headlight

switch on then off, or by turning the ignition ON.

204 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

1 2 ... 201 202 203 204 205 206 207 208 209 210 211 ... 696 697

Kommentare zu diesen Handbüchern

Keine Kommentare

Dodge 2013 Durango Bedienungsanleitung Seite 206

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Dodge 2013 Durango