Dodge 2006 LX Charger Wartungshandbuch Seite 47

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 56
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 46
3 - 7 INSTALLATION CONSIDERATIONS 2006 P olice Uptter’ s Guide
9. 389.0 mm (15.3 in.)
10. B -pillar trim
1 1. Side airbag inator module
12. 89.0 mm (3.5 in.)
VEHICLE MODIFICA TIONS
It is imperative that all occupant restraint system components remain in their original location and orientation.
Any modication, removal, or relocation of components may be detrimental to the occupant restraint system
performance and is prohibited. Any vehicle modication that may affect the occupant restraint system charac-
teristics should be veried through vehicle calibration/impact testing.
OCCUP ANT RESTRAINT SYSTEM WIRING
All occupant restraint system wiring must remain intact and may not be used for any other purpose. This includes the
driver and front passenger seat wiring. Any electrical connector that is yellow is part of the occupant restraint system
and should not be modied or used for other purposes.
OCCUP ANT RESTRAINT SYSTEM VERIFICA TION
After any modication work is complete, conrm the occupant restraint system readiness as follows:
T urn the ignition key to the ON position. The airbag lamp in the instrument cluster illuminates for 6 to 8 seconds,
and then turn of f. If the airbag lamp fails to illuminate, repeatedly cycles on and of f, or does not turn of f, have the
condition corrected by an authorized DaimlerChrysler Corporation dealership before shipping the vehicle to the
customer .
P ASSENGER COMP ARTMENT
POLICE EQUIPMENT MOUNTING BRACKET
The police equipment mounting bracket is installed in the center console area between the front seats, and is standard
on all Dodge Charger and Magnum vehicles equipped with police prep package. The police equipment mounting bracket
is provided with longitudinal slots that allows the vehicle modier to securely mount equipment such as police radios,
emergency lights and siren controls, and computers.
The police equipment mounting bracket has the following
dimensions:
A = 42.77 mm (1.7 in.)
B = 77.72 mm (3.1 in.)
C = 635.0 mm (2.5 in.)
D = 140.0 mm (5.5 in.)
Seitenansicht 46
1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 55 56

Kommentare zu diesen Handbüchern

Keine Kommentare