Dodge 2006 LX Charger Wartungshandbuch PDF herunterladen (Seite 24)

2006 P olice Uptter’ s Guide ELECTRICAL 2 - 12

EASY P A TH WIRING GROMMET

An additional wiring grommet is provided between the en-

gine and passenger compartments. The easy path wiring

grommet is located in the bulkhead on the right side of the

engine compartment and is standard on all police vehicles.

The end of the grommet rubber tube must be cut of f to pass

wiring from the engine compartment into the passenger

compartment. T o avoid water ingress into the passenger

compartment, a drip loop must be provided on the engine

compartment side of the added wiring. In addition, use

R TV silicone or electrical tape to reseal the grommet rub-

ber tube and wiring.

WIRING HARNESS ROUTING

Always consider the routing of the vehicle wiring harness when planning to install additional equipment. T ake care to

avoid damaging the wiring when drilling and/or installing fasteners. No wiring harness relocation is permitted.

The following graphics represent the location of the wiring harnesses and the safety related components inside

the vehicle. Make sure to avoid damaging the wiring or the safety related components when installing additional

equipment.

BODY HARNESS – CENTER TUNNEL AREA

1. Body harness

2. Dynamics electronic stability program (ESP) sensor

3. Occupant restraint controller (ORC) module

4. Battery B+ cable

5. I/P harness

6. Police radio connector

7. Police/taxi interface connector

8. Police accessories connector

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 55 56

Keine Kommentare

Dodge 2006 LX Charger Wartungshandbuch Seite 24