Dodge JR41 Bedienungsanleitung PDF herunterladen (Seite 42)

child restraint rearward and downward into the seat,

removing slack in the straps according to the child

restraint manufacturer’s instructions.

NOTE:

When using the LATCH attaching system to

install a child restraint, please ensure that all seat belts

not beingused for occupant restraints arestowed and out

of reach of children. It is recommended that before

installing the child restraint buckle the seat belt so the

seat belt is tucked behind the child restraint and out of

reach. If the buckled seat belt interferes with the child

restraint installation, instead of tucking the seat belt

behind the child restraint, route the seat belt through the

child restraint belt path and then buckle it. This should

stow the seat belt out of the reach of an inquisitive child.

Remind all children in the vehicle that the seat belts are

not toys and should not be played with, and never leave

your child unattended in the vehicle.

WARNING!

Improper installation of a child restraint to the

LATCH anchorages can lead to failure of an infant or

child restraint. The child could be badly injured or

killed. Follow the manufacturer’s directions exactly

when installing an infant or child restraint.

Installing Child Restraints Using the Vehicle Seat

belt

The passengerseat belts are equipped with cinching latch

plates which are designed to keep the lap portion tight

around the child restraint so thatit is not necessary to use

a locking clip. Pulling up on the shoulder portion of the

lap/shoulder belt will tighten the belt. The cinching latch

plate will keep the belt tight, however, any seat belt

system will loosen with time, so check the belt occasion-

ally and pull it tight if necessary.

42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 295 296

Keine Kommentare

Dodge JR41 Bedienungsanleitung Seite 42